We installed wave bolts with AC100 glue in holes that were not cleaned at all. The climbing bolt disengaged out of glue at 30.8kn and 22.88kn and 26.50kn. For reference, our other tests show these bolts get around 40kn in shear (regardless of glue) and around 40kn in tension if epoxy is used. with Bobby Hutton and edited by Nick McPherson
HIGHLINE UNIVERSITY INTERNATIONAL
www.howNOTtohighline.com
BOLTING BIBLE
https://www.hownot2.com/boltingbible
T-SHIRTS
https://slacklife.threadless.com/
BECOME A WEEKLY SUPPORTER ON PATRON
https://www.patreon.com/howNOTtoHighline
DONATE ON PAYPAL
http://www.paypal.me/slackcessfund
All donations go straight back into making this channel better. We put donors names in the ending credits and give them exclusive access to the SlackSnap and BoltBuster Raw Data spreadsheet + corresponding footage associated with each break.
Behind the Scenes
abc
After Posting Thoughts
abc